Pressure Reducing Station

PRESSURE REDUCING STATION

18	COUPLING
17	FLANGES
16	BENG
15	BY PASS PIPE
14	OUTLET PIPE
13	INLET PIPE
12	STEAM TRAP
11	STOP VALVE
10	PRESSURE GAUGE
9	SAFETY VALVE
8	STOP VALVE (BYPASS)
7	STOP VALVE (OUTLET)
6	DIVERGER
5	REDUCING VALVE
4	REDUCER
3	STOP VALVE (INLET)
2	STRAINER
1	STEAM SEPARATOR
SR No.	ITEM

All PIPES MATERIAL ARE CARBON STEEL SEAMLESS
INLET FLANGE AS PER STANDARD OUTLET FLANGE ARE AS PER STANDARD
FLANGES ARE TO BE WELDING
HYD. TEST TESSURE OF PRS AS PER STANDARD

TECHNICAL SPECIFICATION

FLOW RATE Kg/hr. (MAX) :- 1200

INLET PRESSURE Kg/cm2g :- 5.0 TO 300

OUTLET PRSSURE kg/cm2g :- 2.0 TO 150

INLET TEMPERATURE`C :- SATURATE

PRESSURE REDICUCING STATION WITH CONTROL VALVE

17	FLANGES
16	BENG
15	BY PASS PIPE
14	OUTLET PIPE
13	INLET PIPE
12	STEAM TRAP
11	STOP VALVE
10	PRESSURE GAUGE
9	SAFETY VALVE
8	STOP VALVE (BYPASS)
7	STOP VALVE (OUTLET)
6	EXPANDERD
5	CONTROL VALVE
4	REDUCER
3	STOP VALVE (INLET)
2	STRAINER
1	STEAM SEPARATOR
SR No.	ITEM

ALL PIPES MATERIAL ARE TO BE OF CARBON STEEL SEAMLESS TO ASTM A 106 GR. B, SCH 40
INLET FLANGE ARE AS PER ANSI B16.5-300# OUTLET FLANGE ARE AS PER ANSI B16.5 150#
FLANGES ARE TO BE WELDING AS PER FIG. 29 OF I.B.R.
ALL DIMENSIONS ARE INMM AND TOLE. MAINTAINED WITHIN#100mm
HYD. TEST PRESSURE OF PRS 75 kg/cm 2 FOR 300 #

TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION

FLOW RATE Kg/hr. (MAX) :- 1000

INLET PRESSURE Kg/cm2g :- 20

OUTLET PRSSURE kg/cm2g :- 10

INLET TEMPERATURE`C :- SATURATED